We electrify AGRICULTURE
Neugedachte Lösungen für eine nachhaltige und verantwortungsvolle Landwirtschaft
Solutions for agriculture
The electrification of agricultural machinery offers huge benefits across all areas of application. The e-motor requires much less maintenance when compared to conventional combustion engines, regardless of whether they run on diesel or petrol. The reliable components made by REO enable significantly extended maintenance intervals, or can even be operated without any maintenance at all. This means therefore that the e-motor pays for itself both in terms of its reliability as well as its costs.
REO was able to impressively demonstrate the technical feasibility of its products in a research project commended by the German Agricultural Society, (DLG, Deutsche Landwirtschafts-Gesellschaft).
Cost-effective and reliable operation as well as durability are both extremely important in agriculture. REO is therefore on hand to provide the right components specifically designed for agriculture, all of which offer excellent protection against dust, sludge and mud. Both small vehicles as well as larger heavy machinery are able to benefit from the protection ratings thanks to the scalability of the performance ratings.
There is also a significant improvement in comfort too. All REO components designed for e-mobility deliver the required level of performance straight away. Even the most precise of manoeuvres pose no problem right from the outset. This represents another major benefit compared to combustion engines, which are complicated and restricted as a result of their power curves being speed-dependent.
Components for agriculture
Please select from the following:
Braking resistors
REOHM series D 330
Resistance values : 1 - 100 Ohm
Continuous power : 15000 - 60000 W
max. operating voltage : 800 V
Continuous power : 15000 - 60000 W
max. operating voltage : 800 V
Braking resistors
REOHM series NTT R D 158
Resistance values : 0,1 - 1 Ohm
Continuous power : 100 - 1210 W
max. operating voltage : 4200 V
Continuous power : 100 - 1210 W
max. operating voltage : 4200 V
Braking resistors
REOHM series D 158
Resistance values : 2 - 850 Ohm
Continuous power : 1000 - 60000 W
max. operating voltage : 1000 V
Continuous power : 1000 - 60000 W
max. operating voltage : 1000 V
Choke
NPT 8919
Nennspannung : 230 - 600 V
Nennstrom : 1,5 - 32,5 A
Induktivität : 0,031 - 71 mH
Nennstrom : 1,5 - 32,5 A
Induktivität : 0,031 - 71 mH
Choke
NPT 892
Nominal Voltage : 24 V
Rated current : 0,2 - 4 A
Inductance : 160 - 125000 mH
Rated current : 0,2 - 4 A
Inductance : 160 - 125000 mH
Choke
NPT 8929
Nominal Voltage : 230 V
Rated current : 0,5 - 32,5 A
Inductance : 0,127 - 3180 mH
Rated current : 0,5 - 32,5 A
Inductance : 0,127 - 3180 mH
Current transformers
IE
Primary rated current : 1 - 50 A
Current transformers
Series IE modular
Primary rated current : 500 - 2500 A
Umgebungstemperatur : -25... +70 °C
Frequency range : 50... -400 Hz
Umgebungstemperatur : -25... +70 °C
Frequency range : 50... -400 Hz
Current transformers
Series WKO
Primary rated current : 25 - 2000 A
Frequency range : 100000 - 200000 Hz
Frequency range : 100000 - 200000 Hz
Current transformers
Series WKO-2C
Primary rated current : 500 - 2000 A
Measurement range : 0...4000 A
Frequency range : 150000 Hz
Measurement range : 0...4000 A
Frequency range : 150000 Hz
Current transformers
Series WKO-2C-B
Primary rated current : 500 - 2000 A
Measurement range : 0...3000 A
Frequency range : 120000 Hz
Measurement range : 0...3000 A
Frequency range : 120000 Hz
Filter
CNW M 833
Nominal Voltage : 400 V
Rated current : 8 - 175 A
Inductance : 0,09 - 2 mH
Rated current : 8 - 175 A
Inductance : 0,09 - 2 mH
Filter
CNW M 933
Rated current : 2 - 37 A
Inductance per strand : 1,9 - 29,3 mH
Inductance per strand : 1,9 - 29,3 mH
Load choke
RPD 9039
Nominal Voltage : 400 V
Rated current : 0,6 - 75 A
Inductance : 3,15 - 254 mH
Rated current : 0,6 - 75 A
Inductance : 3,15 - 254 mH
Mains chokes
CNW 903
Nominal Voltage : 3 x 500 V
Rated current : 3-1200 A
Inductance : 9,800-0,024 mH
Rated current : 3-1200 A
Inductance : 9,800-0,024 mH
Mains chokes
NTT MD 953
Nominal Voltage : 400 V
Rated current : 200 - 1200 A
Inductance : 0,012 - 0,074 mH
Rated current : 200 - 1200 A
Inductance : 0,012 - 0,074 mH
Motor choke
CNW M 854
Nominal Voltage : 500 V
Rated current : 2 - 37 A
Inductance per strand : 0,4 - 7 mH
Rated current : 2 - 37 A
Inductance per strand : 0,4 - 7 mH
Solutions for e-mobility
In order to charge products with active and reactive power, REO offers ohmic, inductive and capacitive loads in line with the required application and usage conditions. These loads can be implemented in different stages, either activated directly on the load or via coordinated interfaces. There are various options available to control, visualise and transfer measurement values. These include, among others, the control and exchange of data via PC, PLC or standardised industrial interfaces. The operating mode can also be set here using the button or touch screen panel on the device, or via remote control.
Please select a solution:
Components for e-motors
Electric motors or entire drivetrains for e-mobility…
Components for charging stations
Durable and safe wall boxes, docking stations or wall-based charging stations…
Test equipment for e-mobility
Mobile testing systems for all electronic components and their peripheral equipment…
Contact details
Contact and product inquiry
Do you have questions, requests or suggestions?
Please don’t hesitate to contact us:
REO AG
Brühler Strasse 100
D-42657 Solingen
Tel.: 0049-(0)2 12-88 04-0
Fax: 0049-(0)2 12-88 04-188
E-Mail: info@reo.de
USt-ID-Nr.: DE 182 486 130
St.-Nr.: 128/5819/5634